PL2303GT
USB to RS232 Bridge Controller
OVERVIEW
The PL2303GT is a low cost and high performance USB-to-RS232 Bridge Controller with built-in RS232 transceiver. The PL2303GT provides a convenient solution for connecting an RS-232 full-duplex asynchronous serial device to any Universal Serial Bus (USB) capable host. The PL2303GT highly compatible drivers could simulate the traditional COM port on most operating systems allowing the existing applications based on COM port to easily migrate and be made USB ready.
The PL2303GT integrates a high baud rate RS-232 transceiver that meets the EIA / TIA-232F and CCITT V.28 communications interface specifications. The RS-232 transceiver is a 3-transmitters and 5-receivers device with a high-efficient charge pump circuit embedded. It provides the bipolar output to the transmitters, and makes the transmitters to deliver the RS-232 output voltage levels. Under normal operation, PL2303GT operates at very low power consumption with guaranteed data rate up to 1Mbps.
FEATURE
- Full Compliant with USB Specification v2.0 (Full-Speed)
- On-chip USB 1.1 transceiver and 5V to 3.3V regulator
- On-chip 96MHz Clock Generator
- Built-in RS232 Transceiver
- Follow EIA / TIA-232F standards
- Full UART RS232 interface pins (TXD, RXD, RTS, CTS, DTR, DSR, DCD, and RI)
- Flexible baud rate support up to 1Mbps
- Three RS232 Drivers design
- Five RS232 Receivers (always active)
- Hardware and software flow control
- On-chip OTP (One Time Programmable) ROM for writing startup device configurations
- Each IC has unique ID (for Serial Number)
- 1024-byte bi-directional data buffers (768-byte receive / 256-byte transmit).
- Supports Windows USB Selective Suspend (Remote Wakeup enabled).
- Supports Windows Modern Standby.
- Supports Windows DCHU (Declarative, Componentized, Hardware Support Apps, Universal).
- 🔗🌐 Custom Product Name & Specified COM Port Technology🌐 🔗
- Patented OEM deployment feature – Taiwan Patent I934369: factory-configure a Specified COM Port number and a clear, product-specific Product String in OTPROM / EEPROM so the product name and COM port can be recognized together.
- Specified COM Port range: supports OEM-specified COM Port numbers from 1 to 65,535.
- Multilingual Product String: supports descriptive product names in multiple languages through the OTP programming tool, helping users distinguish which COM port belongs to which product.
- Clear product-to-port identification: program the intended Product String and Specified COM Port Number during manufacturing so Device Manager can present an easy-to-recognize product name together with its COM number, reducing routine end-user reassignment and manual setup.
- Driver / WHQL advantage: these OTPROM / EEPROM identity settings are designed to work with the Prolific Windows VCP driver without an additional WHQL submission for each configured OEM identity.
PACKAGE
- SSOP28